The Series 700 is comprised of the highest quality components in conjunction with a proprietary anchoring system. Our standard components and features are the competition's upgrades.
18 gauge galvanized (A60), polyurethane, "R11", insulated core, interlocking seam. Doors meet commercial Steel Door Institute (SDI) standards.
Welded frame. 16 gauge galvanized (A60), 5 3/4" standard frame profile, interlocking mitered-corner connection (then welded). Frames meet commercial Steel Door Institute (SDI) standards.
SCHLAGE Grade 2, AL53PD-626-SAT. Meets ANSI A156.2 series 4000, grade 2 requirements. Three-year warranty. Thru bolted for added strength. Free wheeling vandal resistant lever.
Proprietary offset subjamb/jamb anchor system. 16 gauge galvanized (A40 minimum) subjamb. Polyethylene block anchors stiffen jambs and allow for offset design. Self trimming, no jamb trim required.
All doors and frame have a baked-on beige primer coat meeting ANSI A250 standards. Paint test for salt spray, humidity, and adhesion.
Ball bearing silver powder coat hinges with security non-removable pins.
Full 5 3/4" aluminum threshold, dual finger TPE sweep, and urethane foam weatherseal for kerfless type application. All components meet commercial standards and ADA requirements. Doors are stacked on wood skid, connected through the subjambs, or with separation between for doors without subjambs. Doors are enclosed in OSB for protection during shipping.
The Series 700 is covered by a three-year extended warranty guaranteeing the opening to be free of defects in materials and workmanship (certain hardware components have longer warranties).
SCHLAGE D53PD grade 1 entrance lock. Vandal-resistant free-wheeling levers. Independent heavy-duty spring cages for lever support. Thru bolted for positive interlock to door. Tested to 3,000,000 cycles. Five-year warranty.
Grade 1 surface-applied closer. Backcheck, seep and latch speed adjustment valves. LCN 1261 (moderate duty); LCN 1461 (moderate-to-heavy-duty); and LCN 4041 (extra-heavy-duty). Ten-year warranty.
SCHLAGE heavy-duty grade 1 mortise lever lockset with escutcheon plate. 3/4" latch throw and 1" deadbolt throw. Five-year warranty.
Steel latch guard with chrome finish. Prevents tampering with the latch on lever locks.
Various heavy-duty grade 1 rim exit devices from Von Duprin (Series 22 and 99) and Monarch (18 Series). Various finish and trim options. Three-year warranty.
LHR = A = RH = LHO (left hand out)
RHR = B = LH = RHO (right hand out)
©2019 The Bay Family of Companies.